CyberHome Entertainment CH-DVD 635S User Manual download pdf (Page 23)

Powering on the unit

Only after all connections are complete, connect the power cord and power on

the unit.

1. Connect the AC power cord to the “AC IN” inlet on the rear side of this unit

and plug the standard electrical plug into a wall socket or power strip.

2. Press the power switch on the rear panel to activate the power of the device.

The unit is now in Standby mode. Press the button “ON/STANDBY” on the

front panel or the button “STANDBY” on your remote control to power it on

completely.

3. When the display indicates “Loading”, the disc is read.

4. If no disc is inserted, the display will indicate “No disc”.

Inserting a disc

1. Press the Open/Close button “K” on the front panel or on the remote con-

trol to open the tray. The display will indicate “Open”.

2. Carefully place the disc in the tray with the label facing up. Be careful not to

touch the playing surface. Hold the disc by the sides and with your fore fin-

ger through the hold in the middle and insert gently into the tray.

3. Press the Open/Close button “K” again to close the tray. The display

shows “Close”.

4. The inserted disc type is indicated on the screen. If the disc supports the

Auto Play function, playback will begin automatically.

GETTING STARTED

Notes on power states

There are three power states for this unit:

• OFF - The unit is not plugged into a wall outlet. The unit draws no power.

• STANDBY - The unit is plugged into a wall outlet. The unit has not been

taken out of standby by pressing either the button “ON/STANDBY” on the

front panel or the button “STANDBY” on the remote control. The unit

draws a slight amount of power to enable the remote control receiving cir-

cuit. The standby LED is glowing blue.

• ON - The unit is plugged into a wall outlet and either the button

“ON/STANDBY” on the front panel or the button “STANDBY” on the

remote control has been pressed. The unit is ready to use. The LED is

now off.

How to insert a double-sided DVD?

Double-sided discs do not have labelling over the whole surface. The

labelling for each side is in the centre of the disc. To play a side its label

must be facing up.

OPEN

ON/ STANDBY

CH-DVD 635S

Labeling side

Surface

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 68 69

Comments to this Manuals

No comments

CyberHome Entertainment CH-DVD 635S User Manual Page 23

Comments to this Manuals

Related products and manuals for DVD players CyberHome Entertainment CH-DVD 635S