CyberHome Entertainment CH-DVD 635S User Manual download pdf (Page 53)

Changing the audio settings

Highlight the menu point you would like to set in the “Audio setup page”.

Please press “ENTER” or “A” to enter a menu. Use the button “C” or “D” to

select the required audio setting and press “ENTER” to confirm your selection.

You can leave the menu at any time by pressing the button “

B” on your remote

control.

Speaker setup

Audio output

Since most DVD discs feature Dolby Digital 5.1 channel soundtracks, you will

need to use the downmix options in case you are not using the 5.1 channel ana-

logue outputs. You have the following setup options:

LT/RT: If you set to LT/RT, a mixed signal of the surround signal will be pro-

duced on the left and right output. The left output signal consists of the front left

signal plus centre and the sum signal of the left and right signal of the surround

speakers. The right output signal consists of the front right signal plus sub-

woofer plus the difference signal of the left and right signal of the surround

speakers. This setting should be used only with Dolby Pro Logic receivers

capable of decoding this signal type.

Stereo: If you plan to use the stereo analogue outputs for a connection to a TV

or receiver, you must enable this setting to downmix the 5.1 channel sound-

tracks of most DVD movies to a stereo format. If you set to stereo, the left sig-

nal consists of the front left signal plus surround left signal and sum signal of

the centre and subwoofer. The right signal consists of the front right signal plus

surround right signal and sum signal of the centre and subwoofer. This setting

should be used for most televisions and stereo audio equipment.

Virt. Surround: This setting simulates the effect of a 5.1 speaker system by

modifying the signal. With help of a phase shifting, the position of the sound in

the room will be changed so that you get the feeling that there are more than

two speakers in the room. This setting should be used with two speaker sys-

tems.

5.1 channel: Select this option if you are using the Dolby Digital/dts 5.1 chan-

nel analogue outputs or if you want to play a DVD-Audio disc via the 5.1 chan-

nel output.

USER PREFERENCES

A C

Audio setup page

Speaker setup

SPDIF setup

Dual mono/DRC

Channel delay

Sound setup

Surround setup

HDCD

SACD mode

Go to audio setup page

A C

Speaker setup page

Audio output STR LT/RT

Front speak. SML Stereo

Center speak. Off Virt. Surround

Rear speak. Off 5.1 channel

Subwoofer Off

Test tone Off

Dialog 00

Post DRC Off

Set the audio output

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 68 69

Comments to this Manuals

No comments

CyberHome Entertainment CH-DVD 635S User Manual Page 53

Comments to this Manuals

Related products and manuals for DVD players CyberHome Entertainment CH-DVD 635S